Skip to main content

‘Greener’ aerogel technology holds potential for oil and chemical clean-up

February 25, 2014

Cleaning up oil spills and metal contaminates in a low-impact, sustainable and inexpensive manner remains a challenge for companies and governments globally.

But a group of researchers at UW–Madison is examining alternative materials that can be modified to absorb oil and chemicals. If further developed, the technology may offer a cheaper and “greener” method to absorb oil and heavy metals from water and other surfaces.

Shaoqin “Sarah” Gong, a researcher at the Wisconsin Institute for Discovery‘s BIONATES research group and associate professor of biomedical engineering, along with graduate student Qifeng Zheng, and Zhiyong Cai, a project leader at the USDA Forest Products Laboratory in Madison, have recently created the patent-pending aerogel technology.

Photo: Aerogel absorbing chemical

Photo: Aerogel absorbing chemical

In the upper photo, a small sample of the aerogel is stirred into a container of water tainted with red-dyed diesel fuel. In the lower photo, next to an unused sample at left, the aerogel has absorbed the fuel.

Photos:

Aerogels, which are highly porous materials and the lightest solids in existence, are already used in a variety of applications, ranging from insulation and aerospace materials to thickening agents in paints. The aerogel prepared in Gong’s lab is made of cellulose nanofibrils (sustainable wood-based materials) and an environmentally friendly polymer. Furthermore, these cellulose-based aerogels are made using an environmentally friendly freeze-drying process without the use of organic solvents.

It’s the combination of this “greener” material and its high performance that got Gong’s attention.

“For this material, one unique property is that it has superior absorbing ability for organic solvents — up to nearly 100 times its own weight,” she says. “It also has strong absorbing ability for metal ions.”

Treating the cellulose-based aerogel with specific types of silane after it is made through the freeze-drying process is a key step that gives the aerogel its water-repelling and oil-absorbing properties.

Photo: lab team

Shaoqin “Sarah” Gong (left), a researcher at the Wisconsin Institute for Discovery, graduate student Qifeng Zheng (center), and Zhiyong Cai (right), a project leader at the USDA Forest Products Laboratory in Madison, created and patented the new aerogel technology.

Photo:

“So if you had an oil spill, for example, the idea is you could throw this aerogel sheet in the water and it would start to absorb the oil very quickly and efficiently,” she says. “Once it’s fully saturated, you can take it out and squeeze out all the oil. Although its absorbing capacity reduces after each use, it can be reused for a couple of cycles.”

In addition, this cellulose-based aerogel exhibits excellent flexibility asdemonstrated by compression mechanical testing.

Though much work needs to be done before the aerogel can be mass-produced, Gong says she’s eager to share the technology’s potential benefits beyond the scientific community.

“We are living in a time where pollution is a serious problem — especially for human health and for animals in the ocean,” she says. “We are passionate to develop technology to make a positive societal impact.”

Gong and her colleagues have featured their findings in the Journal of Materials Chemistry A.

—Marianne English Spoon

Enjoy this story?

Subscribe to the Wisconsin Idea newsletter